MULTI-MONTI®-plus - The new MULTI-MONTI® with the big Plus

MULTI-MONTI®-plus - The Original among the concrete self-tapping screw anchors MULTI-MONTI®-plus, the secure screw anchor for a powerful and time-saving fixing solution

The new generation of screw anchors MULTI-MONTI®-plus is distinguished by greater efficiency, superior strength and a wider range of applications.

The key feature of the new design is the optimised concrete thread with a larger effective surface area in concrete, which considerably increases its load-bearing capacity. Strengthened toothing on the screw tip makes the MMS-plus both easier to drive and less susceptible to wear. The larger external diameter, at both tip and load-bearing thread, ensures improved undercutting in concrete, which in turn permits higher loads.

The future standard version of the MMS-plus will be a hexagon head with fixed washer. The range also includes numerous versions and a wide choice of diameters and load classes. An expanded product portfolio supports multi-faceted use under wide-ranging architectural conditions and in many application areas.

HECO has put together an outstanding portfolio of approvals for the MMS-plus, which opens a wide range of applications for the user, and provides a high degree of flexibility and reliability.


Available head versions

  • Hexagon head with combined washer
  • Heavy-duty anchor, hexagon head
  • Hexagon head with washer
  • With flange head
  • Countersunk head
  • PanHead
  • Eye-bolt-anchor
  • With metric stud
  • With internal metric thread
  • Pre-set anchor with metric stud

MMS-plus SSK

  • Hexagon head with combined washer and cone
  • Bright zinc plated
  • Diameters [mm]: 16,0
  • Lengths [mm]: 90, 130
  • Temporary fastenings of site equipment for example props, push-pull props, guardrails or scaffolding
  • Dissassembling and reusability is permitted when using checking gauge
  • Approved for the use in young concrete with a compression strength of at least fc,cube > 10 N/mm²
  • Clearance hole diameters from 17 – 23mm in bracings can be covered with one screw
  • Settings can be carried out with machines as no defined installation torque is required
  • No expansion pressure
  • Safely applicable as no hidden mounting errors can occur
  • Approved and monitored product

Suitable materials

The screw anchor is approved for installation in cracked and uncracked concrete. It is also suitable for a whole range of other building materials, such as:

  • Clinker
  • Natural stone (e.g. marble)
  • Sand-lime brick
  • Hollow concrete block
  • Solid brick

Other characteristics

  • Hexagon head, T-Drive
  • Carbon steel
  • Concrete thread
  • Teeth tip for better function
  • Lenghts [mm]: 35 - 320
  • Diameters [mm]: 6 – 12

The advantages at a glance


Product advantages

  • Self-tapping screw anchor
  • Optimized concrete thread with full threaded variations for highest demands
  • Two embedment depths for more flexibility
  • Wider approved assortment of products for ETA option 1 from MMS-plus 6, including seismic from Ø10 mm
  • CE according to ETA-15/0784



  • Increased product assortment and dimensions for various applications taking design and application areas into account
  • Easy settable screw anchor even in case of worn drills
  • Settable by means of power-tools and immediately loadbearing


Application examples:

Prop assemblance
Prop assemblance
Pipe mounting
Pipe mounting
Assembling of supporting props
Assembling of supporting props
Fixing of cable ducts
Fixing of cable ducts
Fixing of railing
Fixing of railing
Fixing of brackets and console bearers
Fixing of brackets and console bearers

Assembly Instructions

HECO-MULTI-MONTI-plus - Step 1
1. Bohren
HECO-MULTI-MONTI-plus - Step 2
2. Bohrmehl entfernen
HECO-MULTI-MONTI-plus - Step 3
3. Einschrauben
HECO-MULTI-MONTI-plus - Step 4
4. Fertig



Produktvideo MULTI-MONTI®-plus 2
Produktvideo MULTI-MONTI®-plus